Tuesday, December 17, 2013

Printing glass environments without support material on the Afinia H-Series

›
Afinia H-Series 3D Printer Setup After installation of the Afinia Software, turn on the printer via switch from the back. In order to ens...
13 comments:
Thursday, December 12, 2013

From Paper to Print to Production

›
     Here at JMU we have the ability to see many of our creative designs through to the end. We can go from just an idea in our heads to an ...
1 comment:
Tuesday, December 3, 2013

Designing a Pencil Holder

›
My first project in openSCAD was design this Pencil Holder just to really learn the properties of openSCAD and some of the functions that ...
1 comment:
Monday, December 2, 2013

Adding Thickness to your STL file

›
This post will give a quick instruction on how you can add thickness to your 3D file by using Blender. If you don't already have B...
2 comments:

Phone Stand made in OpenSCAD

›
So, I had a little free time over Thanksgiving and ended up making this phone stand looking thing. I played around with openSCAD after deve...
Monday, November 11, 2013

Exporting an STL from Matlab

›
In this tutorial, you will learn a simple way to export a 3D image as an STL by using Matlab. The functions you'll need to make the ST...
80 comments:
Wednesday, October 23, 2013

CubeX Trio vs. Afinia H-Series

›
Today we pitted the giant  CubeX Trio  from the  JMU MakerLab  against one of our  Afinia H-Series  3D printers. The Afinia won hands-down,...
28 comments: