Fixing error "material isn't enough, please replace new spool" and Do you have enough material for afinia?

This blog post will explain how to ensure that you have enough material left to print a model given a certain weight. If you get the error below this blog post will also be helpful.

If you are trying to eliminate the error above and you are sure you have enough material left, the fix is simple. Simply go to 3D print>Maintenance from the Afinia software, then click the new spool button. Set the material type you are using and the weight to 700 g and click OK. This will reset the program's internal counter of material used.

If you would like to know if the material you have is going to be enough to print a model you can weigh it on the black scale in the lab and then enter this weight into the new spool dialogue box instead. If you are also weighing the spool, an empty spool weights about 280 grams so simply subtract this from your measurement. The stand for the spool weighs about 52.3 g so this can also be subtracted or the scale can be tared before placing the spool onto it.

TIP: there is also a 500 g calibration weight that can be used if the scale needs to be re-calibrated. Follow the instructions on the cover of the scale to tare and re-calibrate.